Power windows are a convenient feature in modern cars, but when they stop working, it can be a real hassle. Whether your window is stuck open, stuck closed, or simply not moving at all, it’s important to diagnose and fix the problem quickly. In this comprehensive guide, we’ll walk you through the steps to troubleshoot and repair common power window issues in your vehicle.
Electrical Diagnosis
If you press the window switch and nothing happens, or you don’t hear any noises coming from inside the door, it’s likely an electrical issue. To diagnose an electrical problem, you’ll need a few tools:
- Digital multimeter
- Panel popper tool
- Safety glasses
First, locate and check the fuse for the problematic window motor. If it’s blown, replace the fuse. A blown fuse can indicate increased power draw due to a binding or worn mechanical component, so you should continue with the mechanical repair process once you replace the fuse.
Next, remove the door panel and locate the power and ground wires connected to the window motor. Attach the multimeter to the wires, then activate the window switch with the car’s key in the on position. If you are getting power in both directions of the switch, then the electrical wiring to the motor is good, and the motor should be replaced. If you are not getting power to the motor wiring, then you need to check for power going to the window switch.
If power is going to the window switch but no power is coming out, replace the window switch. If you are not getting power to the window switch, it may indicate a larger electrical issue that a qualified mechanic will need to inspect.
Mechanical Diagnosis
If you press the window switch and hear or see the window trying to move, it’s more likely a mechanical issue than an electrical issue. To fix a mechanical issue, you’ll need:
- Butyl rubber tape
- Door panel screws (commonly 8mm, 10mm, T30, or phillips)
- Glass cleaner
- Gloves
- Silicone spray
- Trim wedge
- White lithium grease
Once you’ve gathered these materials, remove the door panel and inspect the cables or window guides for broken or misaligned pieces. If you see a loose or broken cable and hear the motor moving when you hit the window switch, the window regulator may need to be replaced.
If the cables are intact and the guides are aligned, the window motor may have stripped gears. Remove the motor from the regulator to check.
Replace or repair any parts that are broken or stuck, lubricate moving parts and window guides, and clean the window glass. Reinstall the door panel using the reverse process to how you removed the panel.
Remember, safety should always be your top priority when working on your car. Wear gloves and safety glasses to protect yourself from sharp edges and flying debris.
If you’re not comfortable performing the repairs yourself, it’s best to take your car to a qualified mechanic who can diagnose and fix the problem quickly and efficiently.