How to Fix a Chip in a Bathtub: A Step-by-Step Guide

Chipped bathtubs can be an eyesore and a potential safety hazard. However, with the right tools and techniques, you can easily repair a chip and restore your tub’s appearance. In this article, we’ll guide you through the process of fixing a chip in a bathtub, whether it’s made of ceramic, porcelain, acrylic, fiberglass, or enamel.

Gather the Necessary Supplies

Before you begin, make sure you have the following supplies:

A 2-component epoxy repair kit that closely matches the color of your bathtub or a combination of kits to create the desired shade
Fine-grit sandpaper
Painter’s tape
Denatured alcohol or acetone
Gloves
Mixing sticks

Preparing the Chipped Area

Start by thoroughly cleaning the chipped area with denatured alcohol or acetone to remove any dirt, grease, or soap residue. Lightly sand the edges of the chip to create a smooth surface for the epoxy to adhere to. Wipe away any dust with a clean cloth.

Mixing and Applying the Epoxy

Follow the instructions provided with your epoxy repair kit to mix the two components. Once mixed, apply the epoxy to the chipped area, making sure to fill it completely. Use a putty knife or a mixing stick to smooth the surface and ensure a level finish.

Allowing the Epoxy to Cure

Allow the epoxy to cure according to the manufacturer’s instructions, which typically range from 24 to 48 hours. During this time, avoid using the bathtub and keep the area dry.

Sanding and Painting

Once the epoxy has fully cured, lightly sand the area with fine-grit sandpaper to create a smooth surface. Wipe away any dust and apply a thin layer of paint that matches the color of your bathtub. Use painter’s tape to protect the surrounding areas if necessary.

With these steps, you can successfully repair a chip in your bathtub and restore its appearance. Remember to always follow the instructions provided with your epoxy repair kit and take safety precautions when working with chemicals.