Broken china can be a heartbreaking experience, but with the right techniques, you can restore your cherished pieces to their former glory. In this comprehensive guide, we’ll walk you through the process of fixing broken china flawlessly.
Prepare the Fragments
Clean the fragments with washing-up liquid to remove all traces of grease and dirt. This will ensure a strong bond between the pieces. Before applying any adhesive, have a trial run at fitting the pieces together – without glue. This will help you visualize the final result and plan your approach.
Mix the Adhesive
The best glue for repairing china is typically a two-part epoxy resin adhesive. Mix the epoxy resin and hardener according to the manufacturer’s instructions, ensuring a thorough and even blend. Apply the adhesive sparingly along the broken edges of the two largest pieces, using a small brush or toothpick.
Assemble and Secure
Carefully align the broken edges and press the pieces together, holding them in place until the adhesive begins to set. You may need to use clamps, wax, or other tools to keep the fragments in the correct position while the glue dries.
Fill in Gaps
If there are any gaps or missing pieces, you can use a filler material, such as epoxy putty or a mixture of the adhesive and baking powder, to create a seamless repair. Smooth the filler with a small spatula or your finger, and allow it to fully cure before sanding or painting.
Finishing Touches
Once the adhesive has fully cured, you can carefully remove any excess glue with a razor blade. If necessary, you can touch up the repaired area with paint or glaze to match the original finish.
With patience and attention to detail, you can restore your broken china to its former beauty. Remember, the key to a flawless fix is in the preparation and the careful application of the right adhesive.