How to Manually Raise a Stuck Power Window in 5 Easy Steps

If your car’s power window is stuck in the down position, it can be a frustrating and inconvenient problem. However, with a few tools and some basic knowledge, you can manually raise the window yourself. In this article, we’ll guide you through the process step-by-step so you can get your window back up and running in no time.

Step 1: Take Out the Door Panel

The first step is to remove the door panel to access the window mechanism. Start by removing any screws or clips that are holding the panel in place. You may need to use a screwdriver or pry tool to gently pop the panel off. Be careful not to damage the panel or any wires that are attached to it.

Step 2: Detach the Window from Motor

Once the door panel is removed, you’ll see the window regulator and motor assembly. Locate the screws or bolts that are holding the window glass to the regulator and remove them. This will allow you to separate the window from the motor and move it independently.

Step 3: Find and Disconnect the Motor

Next, you’ll need to locate the power window motor and disconnect it from the regulator. Look for the motor’s mounting screws or bolts and remove them. You may also need to disconnect any wires that are attached to the motor.

Step 4: Attach the Window to the Motor and Raise It

With the motor disconnected, you can now manually move the window up and down using the regulator. Grab the regulator and carefully move it upwards to raise the window. You may need to apply some force to get the window moving, but be gentle to avoid damaging the mechanism.

Step 5: Put Back the Door Panel

Once the window is in the desired position, reattach the window glass to the regulator using the screws or bolts you removed earlier. Then, reconnect the power window motor and secure it in place. Finally, replace the door panel and secure it with the screws or clips.