How to Manually Roll Up a Stuck Power Window: 2 Easiest Methods

Power windows are a convenient feature in modern cars, but they can sometimes get stuck in the open position, leaving your car vulnerable to the elements. If you find yourself in this situation, don’t worry – there are a few simple steps you can take to manually roll up a stuck power window. In this article, we’ll walk you through two easy methods to get your window back up and running.

Method 1: Using the Window Switch

Turn the ignition key to the “on” or “accessory” position. This will provide power to the window motor.
Press and hold the window switch in the “closed” or “up” position. Keep the switch depressed until the window is fully closed.
If the window doesn’t move, try opening and then slamming the car door while holding the switch in the “up” position. The force of the door closing may help dislodge the window and get it moving again.
If the window still doesn’t budge, proceed to the next method.

Method 2: Manually Raising the Window

With the window in the down position, remove the door panel to access the window mechanism. This typically involves removing screws or clips around the perimeter of the panel and carefully pulling it off.
Once the panel is removed, locate the window regulator – the mechanism that raises and lowers the window. It will have a cable or gear system connected to the window glass.
Gently push the window glass upwards, using firm pressure between your palms. Slowly move your hands up to raise the window.
If the window is stuck due to a damaged regulator cable or gear, you may need to apply more force to get it moving. Be careful not to apply too much pressure, as you don’t want to damage the mechanism further.
Once the window is fully raised, secure it in place with tape or a wedge to prevent it from falling back down.
Replace the door panel and secure it in place.
Remember, these methods are temporary fixes and don’t address the underlying cause of the stuck window. It’s important to have the issue diagnosed and repaired by a professional mechanic to ensure the long-term functionality of your power windows.
In conclusion, a stuck power window can be a frustrating problem, but with a little elbow grease and these two easy methods, you can get your window back up and protect your car’s interior. Follow the steps carefully, and don’t hesitate to seek professional help if needed.