How to Patch a Hole in a Bicycle Tire

A puncture hole in a bicycle tire can be an inconvenience, but the good news is that it’s easy to fix with the right tools and techniques. Whether you have a small cut from a shard of glass or a larger hole, you can patch the inner tube and get back on the road in no time.

Removing the Tire and Tube

Locate the Puncture

The first step is to remove the tire and tube from the wheel. Deflate the tube completely, then use tire levers to pry the tire off the rim. Inspect the tube to find the puncture – you may need to submerge it in water to locate a small hole.

Clean the Area

Once you’ve found the puncture, use sandpaper or an abrasive pad to lightly rough up the area around the hole. This will help the patch adhere properly. Make sure to clean off any dirt or debris.
Patching the Tube

Apply the Patch

Follow the instructions in your patch kit to apply the adhesive and patch. Apply a thin, even layer of glue to the tube, then center the patch over the hole and press firmly. Allow the glue to fully dry before proceeding.

Inflate and Reinstall

Inflate the patched tube to check for any remaining leaks. If it holds air, you can reinstall the tube and tire back onto the wheel. Make sure the tire is properly seated before inflating to full pressure.
With the right tools and a little know-how, you can easily patch a hole in your bicycle tire and get back on the road. It’s a valuable skill for any cyclist to have.