Can Sagging Sofa Springs Be Repaired? A DIY Guide

If your sofa has seen better days and the springs are starting to sag, don’t despair! With a little elbow grease and some basic tools, you can often repair the springs yourself and restore the comfort of your beloved couch. In this guide, we’ll walk you through the steps to fix sagging sofa springs and share some tips to help you along the way.

Identify the Problem

The first step in repairing sagging sofa springs is to identify the root cause of the issue. Gently press down on the cushions and observe where the sagging is most pronounced. If you notice a specific area that feels significantly softer or more depressed than the rest of the couch, chances are the springs in that section have lost their tension or become damaged.

Gather Your Tools

Before you begin the repair process, make sure you have the necessary tools on hand. You’ll need a screwdriver, pliers, and possibly a hammer or staple gun, depending on the specific construction of your sofa. It’s also a good idea to have a pair of gloves to protect your hands from any sharp edges or springs.

Remove the Cushions and Fabric

Carefully remove the cushions from the sofa and set them aside. Next, use a screwdriver to remove any staples or screws holding the fabric in place. Gently pull the fabric away from the frame, being careful not to tear it. This will give you access to the springs and allow you to assess the damage more closely.

Repair or Replace Damaged Springs

If the springs are only slightly twisted or out of place, you may be able to fix them using pliers. Gently grasp the spring and carefully twist it back into its proper position. If the spring is severely damaged or broken, you’ll need to replace it. You can purchase replacement springs from a hardware store or online retailer. Follow the manufacturer’s instructions for properly installing the new spring.

Reinforce the Frame

If the sofa frame is sagging or showing signs of wear, you may need to reinforce it to provide additional support for the springs. Use wood glue and clamps to secure any loose joints, and consider adding additional support beams or braces if necessary.

Reassemble and Test

Once you’ve repaired or replaced the springs and reinforced the frame, it’s time to reassemble your sofa. Carefully replace the fabric, securing it with staples or screws as needed. Replace the cushions and give your sofa a test run. If the sagging persists or you notice any other issues, repeat the repair process or consult a professional for further assistance.