How to Easily Repair Curb Rash on Painted Rims: A Step-by-Step Guide

Curb rash can be an unsightly and frustrating problem for car owners, but with the right tools and techniques, it can be easily fixed. In this article, we’ll walk you through the process of repairing curb rash on painted rims, step by step.

The Refinishing Process

To begin, clean the damaged area thoroughly. Cover the tire and valve stem if they are near the damaged area. Next, use coarse sandpaper to sand out the scratches and jagged edges. Once the area is smooth, apply Bondo putty to cover the scratched areas. Gently sand the putty until it is completely smooth.

Priming and Painting

After sanding, scuff about six inches around the damaged area with a scuff pad until it is completely smooth. Spray three or four coats of primer on the wheel, allowing it to dry between coats. Then, spray a couple of coats of paint on the wheel, sanding between coats. Let the paint dry completely.

Clear-Coating and Polishing

Finally, spray two light coats of clear coat over the paint. Allow the clear coat to dry completely. Use a bristle brush to scrub the face of the wheel lightly, removing any overspray. Wipe the surface off completely with a microfiber towel.
Remember, it’s important to wear eye protection, gloves, and a mask when working with these materials. It’s also best to fix curb rash on a warm, sunny day for quicker drying times.