How to Fix a Broken Tape Measure in 5 Easy Steps

If your tape measure has stopped retracting or is stuck, don’t worry – it’s a common problem that’s usually easy to fix. With a few simple tools and some patience, you can have your measuring tape working like new again. Here’s a step-by-step guide on how to fix a broken tape measure:

Step 1: Disassemble the Tape Measure

Start by removing the screws on the back of the tape measure case. This will allow you to access the internal mechanism. Be careful when opening the case, as there may be some tension from the spring.

Step 2: Inspect the Spring

Take a look at the spring that powers the tape measure’s retraction. If it’s broken or damaged, you’ll need to replace it. If the spring is intact but the tape is stuck, it may just need to be realigned or untangled.

Step 3: Clean and Lubricate

Use a clean cloth to wipe away any dirt or debris that may be causing the tape to stick. You can also apply a small amount of lubricant to the spring and moving parts to help them move more smoothly.

Step 4: Reassemble and Test

Put the tape measure back together, making sure all the parts are aligned correctly. Replace the screws and test the tape measure to ensure it retracts properly.

Step 5: Replace the Tape if Needed

If the tape itself is damaged or broken, you may need to replace it. This can be a more complex repair, but it’s still possible to do at home with the right tools and a bit of patience.