If you have a polyurethane finished table that has developed some unsightly scratches, don’t worry – there’s an easy fix! With a few simple steps, you can restore your table’s smooth, glossy surface. Here’s how to do it:
Determine the Severity of the Scratches
First, take a close look at the scratches to assess their depth. If they are only surface-level scratches in the polyurethane finish and haven’t penetrated down into the wood, you can likely fix them with a quick repair. However, if the scratches are deeper and have damaged the wood underneath, you may need to sand down the entire surface and reapply the polyurethane finish.
Clean the Affected Area
Before attempting any repairs, make sure the scratched area is clean and free of any dust or debris. Wipe it down with a clean, dry cloth to remove any surface dirt.
Apply Fine Steel Wool
For superficial scratches, take a piece of fine steel wool (grade 0000 is best) and gently rub it over the scratched area, following the direction of the wood grain. The steel wool will help to smooth out and blend the scratches into the surrounding finish.
Remove Dust with a Damp Cloth
After rubbing with the steel wool, take a clean cloth and lightly spray it with water. Use this damp cloth to wipe away any steel wool residue or dust that was created during the process. Allow the area to dry completely before moving on.
Apply a Polyurethane Touch-Up
Once the area is clean and dry, use a small artist’s brush to apply a thin coat of polyurethane over the scratches. Try to match the sheen of the existing finish as closely as possible. Apply as many coats as needed to blend the repair seamlessly into the table top. Allow each coat to fully dry between applications.
With these simple steps, you can easily fix those pesky polyurethane scratches and restore your table to its former glory. Regular maintenance, such as using coasters and placemats, can help prevent future scratches from occurring.