If you’re stuck in an automatic repair loop in Windows 10, don’t panic. There are several ways to break out of this frustrating situation and get your computer back up and running. In this article, we’ll walk you through the steps to fix the automatic repair loop and get your system back to normal.
Symptoms of the Automatic Repair Loop
The automatic repair loop is characterized by a few key symptoms:
Your computer displays a black screen with the message “Preparing Automatic Repair” or “Diagnosing your PC”
You see a blue screen with the error message “Automatic Repair couldn’t repair your PC” or “Your PC did not start correctly”
Your computer gets stuck in an endless reboot cycle, unable to boot into Windows
These symptoms indicate that the automatic repair tool has encountered an issue and is unable to complete its diagnostic tests, leading to the dreaded repair loop.
Causes of the Automatic Repair Loop
There are several potential causes for the automatic repair loop in Windows 10:
Missing or corrupted system files, including issues with the Windows Registry
Incompatible or faulty hardware, such as hard drives
File corruption in the Windows Boot Manager
Problems caused by a recent Windows update
Identifying the root cause can help you choose the most effective solution to break out of the repair loop.
Solutions to Fix the Automatic Repair Loop
Here are some methods to fix the automatic repair loop in Windows 10:
Solution 1: Remove External Devices and Restart
Disconnect all external devices, including keyboards, mice, external hard drives, printers, memory cards, and adapter cards
Restart your computer and see if it boots into Windows
If successful, update your BIOS, Windows, and drivers to prevent future issues
Solution 2: Use the Startup Repair Tool
Navigate to the Windows 10 Advanced Startup Options menu
Select “Troubleshoot” and then “Advanced options”
Click “Startup Repair” and let Windows attempt to locate and fix issues
If successful, update your BIOS, Windows, and drivers to prevent future issues
Solution 3: Run System Restore
Access the Advanced Startup Options menu and select “Troubleshoot”
Choose “Advanced Options” and then “System Restore”
Select a restore point created before the automatic repair loop occurred
Click “Next” and wait for the restore process to finish, then restart your computer
Solution 4: Use System File Checker and CHKDSK
Access the Advanced Startup Options menu and select “Troubleshoot”
Choose “Advanced Options” and then “Command Prompt”
In the command prompt, type “chkdsk /r c:” and press Enter to check and repair drive errors
Type “sfc /scannow” and press Enter to scan for and repair corrupted system files
Solution 5: Disable Automatic Repair
Access the Advanced Startup Options menu and select “Troubleshoot”
Choose “Advanced Options” and then “Command Prompt”
In the command prompt, type “bcdedit /set {current} recoveryenabled No” and press Enter to disable automatic repair
If none of these solutions work, you may need to consider a clean install of Windows 10. However, before doing so, make sure to back up any important data to avoid losing it during the reinstallation process.
By following these steps and troubleshooting the root cause of the automatic repair loop, you should be able to get your Windows 10 computer back up and running smoothly. Remember to keep your system updated with the latest BIOS, Windows, and driver versions to minimize the risk of future issues.