Engineered hardwood floors are a popular choice for many homeowners due to their durability and easy maintenance. However, even the most well-cared-for floors can suffer from gouges and dents over time. If you find yourself with a damaged engineered hardwood floor, don’t worry – there are several ways to repair the damage and restore your floors to their former glory.
Using a Wax or Putty Filler
One of the easiest ways to repair gouges in engineered hardwood floors is by using a wax or putty filler. These products come in various wood colors, making it easy to match your existing floor. Here’s how to use them:
Use a smooth-edged flexible steel putty knife to apply the wax or putty filler to the hole in the floor. Put just enough filler on the knife end to fill the hole with only slight excess.
Apply the filler to the hole moving at an angle that is diagonal to the length of run of the floor board or gouge or hole.
Allow the filler to dry completely according to the manufacturer’s instructions.
Once dry, sand the area lightly to blend it in with the surrounding floor.
Sanding and Refinishing
If the gouges in your engineered hardwood floor are more extensive, you may need to sand and refinish the affected area. This process involves sanding down the damaged area until it’s level with the surrounding floor, then applying a new finish. Here’s how to do it:
Use a palm sander or orbital sander to sand down the damaged area, being careful not to sand too deeply into the wood.
Vacuum up any dust or debris, then wipe down the area with a damp cloth.
Apply a wood stain that matches your existing floor, if desired.
Apply a new finish, such as polyurethane, in thin, even coats. Allow each coat to dry completely before applying the next.
Remember, it’s important to protect your engineered hardwood floors from future damage by using felt pads under furniture, keeping pet nails trimmed, and cleaning up spills immediately. With proper care and maintenance, your floors can look beautiful for years to come.